Running Toilet and when to call a Plumber Geelong
Posted by Lead Gen on October 28, 2018Have you ever wondered why you have a running toilet? Firstly, it is important that you acknowledge the fact that every hand made device is always bound to break and this is no exception with your toilet. Therefore, in case you realize that your toilet is running, you should never be worried at all; instead, simply take some time and figure out why it is running, and then consider repairing it.
Plumber Geelong advice on how to establish causes of a running toilet.
For you to establish the main cause of the problem in your toilet, it is paramount to remove the top tank of the toilet and place on a secure location. Try pushing the toilet’s flush lever and examines what happens.
On many occasions, one will agree with the fact that one of the reasons why the toilet runs is simply because one or all of the following has/have problems.
- Tank ball
- Ball cork
- Intake valve and/or
- Float ball
Plumber Geelong advise on how to repair a leaking toilet
Having identified the reason why your toilet is running, it is then important to think of a way of repairing it. So how do you fix a running toilet?
There are complicated aspects in the toilet repair that inexperienced persons cannot handle. Therefore, consider hiring experienced personnel first like Geelong 24 Hour Plumbing.
Check if the spare parts in the toilet tank require any replacement or just repair. It is important to note that different people use various mechanisms. However, all these normally lead to the same answers.
Try checking if the chain is in contact with the flapper. It is important to thread the flapper chain using a plastic straw as this prevents the long chain from sticking on to things. Complete replacement of the chain is another remedy for this. You can achieve this by using a dental floss made loop having a similar length to the chain.
Also, it is important to ensure that the water is filled to the water line as lack of water is what basically makes the toilet to run.
Another tip for fixing the running problem is through adjusting the float and valve. By using your hands, you can lift up the float. If the action stops the water flow, it is advisable to adjust the float level for the tank to stop filling having attained the required amount of water flow, slightly below the overflow tube.
Finally, ensure that the flapper is well cleaned to prevent a repeat of the running. Dirty flappers have always been blamed for the leaking of the toilets. This should then be followed by troubleshooting any other problem in your toilet so that it may function normally.
When in doubt call a Plumber Geelong
The best quickest and safest method of repairing your running toilet is to call a plumber Geelong to attend to the repairs for you. They carry most the spare parts for different brands of toilets and this will save you the hassle of running around looking for parts.
If you are having further issues, get in touch with a great plumber from Geelong 24 Hour Plumbing
Tags: 24 hour plumber Geelong emergency plumber Geelong, blocked drain geelong, Carbon Monoxide Testing Geelong, Drain Camera Geelong, gas plumber Geelong, hot water system geelong, Plumber Armstrong Creek, Plumber Batesford, Plumber Bell Park, Plumber Bell Post Hill, Plumber Belmont, Plumber Breakwater, Plumber Ceres, Plumber Corio, Plumber Curlewis, Plumber Drumcondra, Plumber Fyansford, plumber geelong, Plumber Geelong City, plumber Geelong East, Plumber Geelong West, Plumber Grovedale, plumber Hamlyn Heights, Plumber Herne Hill, plumber Highton, Plumber Inverleigh, Plumber Leopold, Plumber Lovely Banks, Plumber Manifold Heights, Plumber Marshall, Plumber Moolap, Plumber Moorabol, Plumber Mount Duneed, Plumber Newcomb, plumber Newtown, Plumber Norlane, Plumber North Geelong, Plumber North Shore, Plumber Ocean Grove, Plumber Rippleside, Plumber South Geelong, Plumber St Albans Park, Plumber Thomson, plumber Waurn Ponds, Plumber Whittington, Plumbers Geelong, Plumbing Geelong
Posted in: blog
Leave a Comment (0) ↓