A leaking tap can prove a menace to any homeowner. Failure to fix a leaking tap in time could lead to loss through water spillage. In many instances, one may require the help of a Plumber Geelong, but the available professionals could be busy elsewhere. Instead of waiting too long for a trained Plumber Geelong, there are DIY options that can help one to fix a leaking tap. Here are some things you need to understand about fixing leaking taps.

What a Professional Plumber Geelong can say about leakage

As a well-established Plumber Geelong will explain, there are various reasons behind a leaking tap. One of the things that lead to leakage is a worn out washer or the o-ring. It is good to replace these parts from time to time to ensure the tap remains in perfect condition. Before buying a new part, it is advisable to consult with a professional Plumber Geelong to get insights about the right size and quality that can be fitted.

Using Instructions from a Plumber Geelong to repair the tap

In the absence of a Plumber Geelong, the first step to fixing a leaking tap is turning the water flow off. There are taps under the sink that run up, and that is the right point to stop the flow of water. You should also remember to put the plug in the basin so you can hold any small parts from going down the drain. You need several tools so you can make the process possible and easy. Using a screw driver, undo the handle screw and remove the handle. You will find this screw under the hot or cold mark, although some will have the screw on the side. Using a wrench, undo the tap bonnet and take off the headgear. At this point, the jumper valve and the o-ring are visible and can be replaced. There are the parts that should be replaced.

Talk to a Plumber Geelong for the best faucet

There are various types of faucets in the market and quality varies. Discuss with a reliable Plumber Geelong to get insight on what can work best to offer durability and reliability. Remember to apply a waterproof lubricant, which helps to extend the life span of the o-rings and any other metallic parts. This procedure will save you both time and money if you follow keenly.