Handy Hints

Posts Tagged plumber geelong

Do You Have Problems with your Hot Water System Geelong?

Posted by on September 29, 2014

Hot water systems can cause problems every once in a while. Sometimes, when you turn on the shower, it takes a while for the water to actually get warmer. This is due to the amount of distance between the water heater and faucet. This may explain why when you hop into the shower, you are overcome with a cold blast of water! A solution to this is to have a small, water heater in your bathroom.

Another issue that occurs with a hot water system is low water pressure. Your hot water pipes are most likely clogged up with deposited minerals. This can cause you water pressure to go from a great amount of pressure with cold water, to barely any water coming out of the faucet with hot water! If you do not want this to occur, you can call a plumber to flush out your water heater yearly and clean out your pipes.

Also, a big problem with hot water systems is that the hot water turns off for a while. If you have several people in your home, this is a common problem. After some people take nice, hot showers, they leave you with the icy, cold water that nobody wants! We all know that that’s not very fun! A solution to this issue is having your local plumber come and either install a larger water tank heater, or install a tankless water heater. This way, the entire family can enjoy nice, warm showers!

You may also wonder why your hot water tank is noisy. Well, the answer to this is that residue builds up in your water heater, and this may cause those loud pops and pings you hear every now and then! The residue building up in your hot water system can take up a lot of space in your tank, leaving you with a reduced water volume. If this is an issue for you, you can call your plumber to flush out and drain the tank.

Another possible trouble you may have is that your water heater smells. No one wants their house filled with an unpleasant odor! You may have this problem because bacteria is entering through your pipes and is growing. Yuck! Luckily, you can call a plumber to handle this issue for you.

If you are experiencing any of these problems with your hot water system, other problems, or just want a new hot water installed, you can call a plumber to fix them. This way, all your hot water problems will be gone!

 

Posted in: blog

Leave a Comment (0) →

Uses of a 24-Hour Plumber Geelong

Posted by on September 23, 2014

Most of the plumbers offer their services on normal working days which are Monday to Friday and their time could be limited from 8.am to 5.m, but under certain circumstances, you may need them at certain times regardless of the time or day of the week. You can get plumbing emergencies at odd hours, even in the middle of the night. When your pipe bursts in the middle of the night, it may not be possible to wait until morning. But with a 24 hour plumber you can rest assured that your plumbing emergencies will be dealt with regardless of the time or the emergency.

Most plumbing companies specialize in a number of services. Since they have to work round the clock, they have a 24hour plumber ready to deal with a plumbing emergency. They are also efficient when it comes to fixing the problem before it ruins everything in your house. Their 24 hour services can save you a lot of money that you would have otherwise spent repairing damages.

A good 24 hour plumbing company is not only licensed, but they also have insurance. You need to be sure your plumber is licensed and has gone through a background check. This will give you peace of mind knowing that you will not compromise your security and that of your home by making that call at midnight.

The good thing about a 24 hour plumber is that you can contact him anytime you need help. But prevention is always better than cure; it is always best to avoid emergencies by having a professional plumber to run a few maintenance procedures in your home. It is always better to plan a preventive maintenance appointment, than it is to wake up in the middle of the night to find a room that is flooded, which is also less expensive compared to repairing.

When plumbing emergency occurs, it is always crucial to know which 24 hour plumber to contact. Take your time and pick the best 24 hour plumbing company that will be prompt and efficient when the unexpected happens.

 

Posted in: blog

Leave a Comment (0) →

Unblocking Blocked Drains

Posted by on August 11, 2014

Block drains are one of the most annoying events that can happen to your when you are at home. There are various reasons why you would be facing this problem. The most common causes of these blockages included

Foreign objects and debris 

Foreign objects that find their way to your drainage may chock your drainage. These objects are usually the objects that are used during cleaning or with water. Soaps, hair, fats, and food are the most common objects that usually block the drain.

Broken pipes 

Your drainage may be blocked because the pipes that channel the water are broken. Broken pipes allow foreign objects that are within the path of the pipe to find their way into the drainage system. Once they are within the system, they prevent the flow of water resulting to blockage.

Water flow related issues 

Blockage as a result of water flow issues are usually as a result of poor installation. If the pipe is such that it requires the flow to go uphill or flow in a levelled ground without external pressure, chances of blockage are high.

How to tell where the problem lies 

If the blockage is on one particular sink or toilet, then the problem is probably with the flow channel of the toilet before it reaches the house drainage system. If more than one sinks or toilets have slow flow or are blocked, then you need to do an inspection on your home pipe work. The problem may be within the house or outside. Look for a square or round plate that les outside your building and check if there is a flow. If the whole neighbourhood is complaining while your whole drainage system is blocked, then the problem is probably with the main drainage system o your neighbourhood.

How to solve the problems DIY

If the blockage is within your house, there are a number of options that you may use to solve the problem. They include:

Plunger 

Grab a toilet plunger and suck water off the blocked sinks or toilets. Fill the sink or the toilet until it is almost full then pump the outlet using the plunger. This way, your will suck the debris or particles that have blocked the system and allow the drainage to continue flowing.

Use Pepsi or Coke 

These drinks are good at removing clogs because they dissolve the calcium that may be causing the clog. Grab two litres of any of the mentioned drinks in their room temperature, pour it down the drain, and let the bubble fizz out. One hour later, armed with hot water, rinse the system. You may use baking soda and vinegar instead of the drinks.

 

Posted in: blog

Leave a Comment (0) →

How to fix your hot water system

Posted by on May 27, 2014

Have you run your bath water only to realise its ice cold? Have you jumped in the shower and been sprayed by cold water? If so, chances are you have a problem with your homes hot water system. Don’t stress, there are a few basic things you can try yourself prior to calling a plumber.  If you have a natural or propane gas water system, chances are the pilot has gone out. The pilot is a small flame that ignites the gas burner on your system. When it goes out, first try relighting it, following the directions on the label, which is often on the front of the system. If the pilot doesn’t relight, or if it goes out right after lighting, by far the most common cause is a broken thermocouple. The good news: you can usually replace a thermocouple for minimal cost and in less than an hour from a local hardware. You’ll get your hot water going without waiting for a pro to show up and save a few dollars!

To replace the thermocouple, be sure to turn off the shutoff valve in the gas line; that is, one quarter turn so that the handle is at a right angle to the pipe. Since working room is tight around the burner, we recommend that you simply unscrew the three nuts at the control valve and pull out the entire burner assembly unit. You’ll see either a slot or clips that hold it in its place. Then either unscrew the thermocouple end or pull it out (depending on the water heater) and take it with you to hardware store to find a match. Position it exactly the same way as the old one. The pilot flame should wrap around the thermocouple bulb.

To reattach the three lines to the gas valve, thread the nuts into place with your fingers and hand-tighten them properly. Then snug them up with a quarter to half revolution with a wrench. The metals are soft, so don’t over tighten as they will break.

Be sure to test for gas leaks. You must have the pilot lit and the burner on for this test so that gas is flowing through the large tube on the system. Reopen the shutoff valve, relight the pilot, then turn the control valve to the “on” position. When the gas burner is on, use a 50/50 dish soap/water mix to test the screw joints for air bubbles that indicate leaks.

Posted in: blog

Leave a Comment (0) →

Plumber Geelong Holiday Season Plumbing Tips

Posted by on May 18, 2014

Bathroom Plumbing

  1. Having guests visiting for the holidays leads to increases in toilet use, so be sure to tell your guests not to put sanitary products, napkins, or baby wipes in the toilet. Not everyone knows that these items belong in the trash and not in the toilet!
  2. Ask your guests to use all the toilets in the house to reduce the load on a single toilet and decrease the chance of it getting backed up.
  3. Make sure there are no items on top of the toilet tank lid and remove any items you may have hanging near or over the toilet bowl. Guests are not used to the way things are positioned in your home and they may accidentally knock an object into the toilet!
  4. In case of a blockage in your toilet, do not keep flushing: use a plunger to try and dislodge the blockage.
  5. If your toilet keeps running on, check the position of the flapper inside the tank. It has to fit over the hole in the base of the tank, if it’s not fitting properly, use the shut off valve, which is normally located under the tank.
  6. Place hair traps in all showers and tub drains, as you will have extra guests taking showers and that will add to the amount of hair going down the drain.

Kitchen Plumbing

  1. A lot of cooking will be happening in your kitchen during the holidays. Make sure that whoever is helping you in the kitchen knows what should go in the trash, what can go in the bio container and what ought to go in the garbage disposal (if you have one).
  2. Avoid putting pasta, rice, coffee grounds, bones, potato skins, egg shells, lettuce or any large amounts of food down the garbage disposal.  Remember to run cold water when using it.
  3. Be sure to never pour that turkey grease or ham fat down the drain and if you don’t have a garbage disposal make sure you have a strainer in your sinks.
  4. If your kitchen sink (or any sinks!) gets blocked use this vinegar and baking soda solution to help unclogged your drain.
  5. For dishwashers, make sure you’re removing the food scraps from the dishes and cutlery and rinsing them in the sink so that the debris doesn’t block the dishwasher water line.

 

Posted in: blog

Leave a Comment (0) →

DIY Plumbing Mistakes-Plumber Geelong

Posted by on February 19, 2014

The common and general plumbing mistake involves the wrong selection of pipes when repairing leaks in your house. This is both in terms of the size & the type of the pipe that is being used. The pipes may therefore fail to fit into each other, as you need. Using too much force when connecting 2 pipes together or forcing the connectors may break the pipes or the pipe connectors. Further leaks may develop in the pipes and they may burst when pressure builds up in the pipe. Corrosion may also occur if you get the pipe type wrong. Professional plumbers know when to use galvanized pipes and when to use the correct copper pipes. Connecting the 2 will lead to corrosion which will require regular replacement of the pipes.

Improvising makeshift tools and equipment in place of what the professional plumber uses is another regular mis happening. For eg, many people use marbles or ball bearings in place of a real level when installing or repairing bathroom fixtures. A ball bearing or marble may not work when checking the level and this could force you into unnecessary common reworks. Getting the level wrong when installing the toilet could also lead to slow flow of sewer or even backups in the plumbing pipes. Using the correct tools for a given task will not only save you time but will also make sure that the pipes do not crack as you are fitting them.

You need to have a good design of where the sewer pipes are to be placed. This is especially the case when carrying out plumbing works in the upper floors of a building or apartment blocks. An odd DIY plumbing mistake involves routing the pipes in the wrong places so that they interfere with occupants of the higher floors of the building. Imagine a situation where you are always woken up by the sound of toilet flushing from the floors above. A common practice by professional plumbers involves designing & planning the drainage network before the implementation.

The last DIY plumbing mistake in the list is failure to turn off the water stopcock before attempting any type of repairs. This is always the first thing that a professional plumber will do even for the tiniest plumbing tasks at. Doing so prevents flooding, which often causes damage to common household items. It will also take you added time to drain the water from the bedroom.

Trying to fix a small problem on your own and getting it wrong could create a major problem. Hiring an emergency plumber to rectify the bigger problem will cost you more money. You should therefore take your time when doing your own plumbing work to avoid such mistakes or call a professional plumber in case you are not sure how to fix the problem

Posted in: blog

Leave a Comment (0) →
Page 32 of 36 «...10203031323334...»